AV Instructions: ETB 537

Control Panel

T

The function of these buttons are as follows:

1. Turn the projector On and Off. Press the LHS to turn On and RHS to turn Off (while it looks like 1 button it is actually 2)
2. Toggle between the 2 sources (HDMI cable connected to desktop, and free HDMI cable that can be connected to laptop)
3. Turn volume up / down (RHS up, LHS down)

Projecting from Laptop

Usage

1 . The desktop is automatically connected to the projector

a. If the desktop and the projector are on, but there is no image, press HDMI or Source Search on the projector remote to switch the source (may need to be pressed a couple of times

3. To use a separate device, connect it to the extra HDMI cable, and switch Source as needed

a. Please bring your own adapter if your device does not have an HDMI output port

Using provided computer, if you do not see any image on the screen:1. Ensure the projector is on

a. The POWER and LAMP lights will be green if the projector is on as well as the fans

2. Ensure the HDMI splitter is powered and plugged in

a. There should be 4 plugs with 4 red lights (bottom left is for power - do NOT unplug, bottom

right is for input, top left is for projector - do NOT unplug, top right is for monitor - do NOT

unplug)

b. Ensure each cable is properly plugged in - remove and replug (ensure correct orientation)

Using the provided computer, if you do not hear any sound:

3. Ensure your computer's sound is on and turned up, and selected properly

a. Left-click the speaker icon in your taskbar, press/hold the right-arrow key on the keyboard

until loud enough

b. If there is a red circle with an X, right-click the speaker icon, left-click Sounds, left click

Playback, right click an option on the list, and left-click Enable; repeat this + 3a if necessary

c. On the same menu as 3b, left-click Set as Default Device, test by repeating 3a , and repeat

this if necessary

Using your own computer, if you do not hear any sound:

4. Ensure your computer's sound is on and turned up

a. Refer to 3a, 3b, and 3c

5. Bring your own speakers, and ensure they are selected properly

a. Ensure your speakers are properly powered and connected to your computer (this varies

according to your speakers)

b. Repeat 3a, 3b, and 3c as necessary