MARC 155B CNC Instructions

G-Code

The CNC Mill's in MARC can utilize G-Code Generated from Fusion or V-Carve Pro. This instruction set will not cover the configurations for G-Code generation.

Avid CNC Software

To manage the mill, use the Avid CNC Software from the desktop:

Home the system

1. Regardless of where the machine is, click on Enable
   
2. Select the Jogging Tab and then bring the CNC mill head up all the way using either the Z+or Page Up button on the keyboard.
   
3. Click on Zero Z button
   
4. Click on Home X Y Axes. This should move the machine to the back right and enable soft limits. IFF the machine is not in the back right corner, click the home button again.
   
5. This completes the system homing process