ETB 226 General Instructions: Difference between revisions

From SEPT Knowledge Base
VisualWikitext
(...)
(Update to current instructions)
 
Line 1: Line 1:
===== This page is about a general Instructions of ETB 226 for the use of the TV. =====
== '''ETB 226 Meeting Room TV Instructions''' ==


=== '''Instructions on Starting the TV and Login to the Local User.''' ===
=== Overview ===
Here is the TV in room 226.
Layout of the meeting room TV and Computer


[[File:1.png]]
[[File:ETB-226 AV overview.png]]


=== General Instructions ===


In order to start the TV, press the "ON" button (picture shows below) located in the cart underneath the TV.
# Turn on the TV using the Samsung remote red power button. Shown below. The remote may either be on the table or at the computer desk. See the section [INSERT SECTION] if remote is missing <br> [[File:ETB-226 remote.png]]
# If you are using the meeting room computer and it does not show up on the screen, confirm that the “'''HDMI1'''” source is selected on the TV using the “SOURCE” button on the remote.  Click repeatedly on the “SOURCE” button until “'''HDMI1'''” is selected.  You can also use the Up/Down direction arrows of the remote to select the input more quickly. You can log onto the computer using your MAC ID. 
# If you use a laptop then connect your laptop to the available HDMI cable that may be on the table.  The TV may automatically switch to your laptop when you plug in the cable to your laptop HDMI port or dongle.  Or you may need to use the remote “SOURCE” button to select “'''HDMI3”'''.  Audio also goes through the HDMI cable.  You may need to manual select HDMI audio output on your laptop if it does not automatically switch on its own.  
# You can control the meeting room computer from the table using the provided wireless keyboard and mouse. Shown below. Check that the power is switched on at each device. <br>  [[File:ETB-226 Keyboard and mouse.jpg|600x600px]] <br>
# To turn off the TV press the red power button on the remote once.  Also turn off the power at the devices.  You can leave the computer on.  Remember to log off


=== Controlling TV without remote ===
[[File:ETB-226 TV Joystick.png|right|480x480px]]


[[File:2.png|463x463px]]
# If the remote is missing, then find the TV joystick power button on the back at the bottom right and press it in to turn the TV on.
# Pressing on the joystick power button again will bring up a menu.
# From the menu you can select the desired source/input by move the joystick towards you (right when looking at the screen) to the “SOURCE” icon.  The icon will be highlighted.  Then press on the joystick button to select “'''SOURCE”'''.
# The Source menu will appear.  Use the joystick to move up or down to the desired source/input.  Then press on the joystick button to select the highlighted source/input.  The menu should disappear once the selection is made.
# To turn off the TV press on the joystick button and then move the joystick down to select the “POWER” icon.   The icon will be highlighted.  Then press on the joystick button to power off the TV.


[[File:ETB-226 TV Joystick menu.jpg|left|thumb|TV joystick menu when first opened]]
[[File:ETB-226 TV Joystick select source.jpg|center|thumb|TV joystick menu with source option selected]]


After pressing, the button should turn red, and the computer should be flashing lights.
An image of the source menu option to select:




[[File:3.re.png]]
[[File:ETB-226 TV Source menu showing HDMI1.jpg|466x466px]]
 
 
Now press the '''PC''' button that is circled in Yellow to start the display. Wait for a few seconds.
 
 
[[File:4.png]]
 
 
This is the default login window, follow the instructions on the table to login with correct username and password.
 
If you want to connect the TV with your own machine, please follow the next section's instructions.
 
 
 
=== '''Teams Shortcut''' ===
After login to the local user, if you want to open Teams, there will be a shortcut from the desktop that leads you to the login page of teams. The shortcut app icon is the icon of Microsoft.
 
[[File:10.png|509x509px]]
 
 
 
=== '''Instructions on How to Connect Your Own Device to the TV.''' ===
--Your machine should have a HDMI port in order to connect.--
 
[[File:5.png]]
 
 
This is the HDMI cable (input 7). The other end is put on the table for connecting machines.
 
 
[[File:6.png]]
 
 
Plug this into your computer's HDMI's port.
 
[[File:7.png|522x522px]]
 
 
Press the INPUT button circled by yellow, and use the direction button circled by red to switch the input port.
 
 
[[File:8.png|606x606px]]
 
 
When you press the INPUT button, the TV should look like this.
 
Switch the INPUT to '''INPUT 7.'''
 
[[File:Input 8.png|514x514px]]

Latest revision as of 16:21, 12 March 2026

ETB 226 Meeting Room TV Instructions

Overview

Layout of the meeting room TV and Computer

General Instructions

  1. Turn on the TV using the Samsung remote red power button. Shown below. The remote may either be on the table or at the computer desk. See the section [INSERT SECTION] if remote is missing
  2. If you are using the meeting room computer and it does not show up on the screen, confirm that the “HDMI1” source is selected on the TV using the “SOURCE” button on the remote.  Click repeatedly on the “SOURCE” button until “HDMI1” is selected.  You can also use the Up/Down direction arrows of the remote to select the input more quickly. You can log onto the computer using your MAC ID. 
  3. If you use a laptop then connect your laptop to the available HDMI cable that may be on the table.  The TV may automatically switch to your laptop when you plug in the cable to your laptop HDMI port or dongle.  Or you may need to use the remote “SOURCE” button to select “HDMI3”.  Audio also goes through the HDMI cable.  You may need to manual select HDMI audio output on your laptop if it does not automatically switch on its own.  
  4. You can control the meeting room computer from the table using the provided wireless keyboard and mouse. Shown below. Check that the power is switched on at each device. 
     
  5. To turn off the TV press the red power button on the remote once.  Also turn off the power at the devices.  You can leave the computer on.  Remember to log off

Controlling TV without remote

  1. If the remote is missing, then find the TV joystick power button on the back at the bottom right and press it in to turn the TV on.
  2. Pressing on the joystick power button again will bring up a menu.
  3. From the menu you can select the desired source/input by move the joystick towards you (right when looking at the screen) to the “SOURCE” icon.  The icon will be highlighted.  Then press on the joystick button to select “SOURCE”.
  4. The Source menu will appear.  Use the joystick to move up or down to the desired source/input.  Then press on the joystick button to select the highlighted source/input.  The menu should disappear once the selection is made.
  5. To turn off the TV press on the joystick button and then move the joystick down to select the “POWER” icon.   The icon will be highlighted.  Then press on the joystick button to power off the TV.
TV joystick menu when first opened
TV joystick menu with source option selected

An image of the source menu option to select:


Retrieved from "http://kb.sept.mcmaster.ca/wiki/index.php?title=ETB_226_General_Instructions&oldid=674"