MARC 155B CNC Instructions: Difference between revisions
From SEPT Knowledge Base
(Created page with "=== G-Code === The CNC Mill's in MARC can utilize G-Code Generated from Fusion or V-Carve Pro. This instruction set will not cover the configurations for G-Code generation. === Avid CNC Software === To manage the mill, use the Avid CNC Software from the desktop: File:Avid CNC Software Launcher.png ==== Home the system ==== # Regardless of where the machine is, click on Enable File:Avid CNC Enable Button.png # Select the Jogging Tab and then bring the CNC mil...") |
mNo edit summary |
||
| Line 9: | Line 9: | ||
==== Home the system ==== | ==== Home the system ==== | ||
# Regardless of where the machine is, click on Enable [[File:Avid CNC Enable Button.png]] | # Regardless of where the machine is, click on Enable<br/>[[File:Avid CNC Enable Button.png]] | ||
# Select the Jogging Tab and then bring the CNC mill head '''up all the way''' using either the '''Z+'''or '''Page Up''' button on the keyboard. | # Select the Jogging Tab and then bring the CNC mill head '''up all the way''' using either the '''Z+'''or '''Page Up''' button on the keyboard.<br/>[[File:CNC Jogging Controls.png]] | ||
# Click on '''Zero Z''' button [[File:Avid CNC Zero Config.png]] | # Click on '''Zero Z''' button<br/>[[File:Avid CNC Zero Config.png]] | ||
# Click on '''Home X Y Axes'''. This should move the machine to the back right and enable soft limits. ''IFF'' the machine is not in the back right corner, click the home button again. | # Click on '''Home X Y Axes'''. This should move the machine to the back right and enable soft limits. ''IFF'' the machine is not in the back right corner, click the home button again.<br/>[[File:Avid CNC Soft Limits Enabled.png]] | ||
# This completes the system homing process | # This completes the system homing process | ||
Revision as of 11:54, 6 November 2024
G-Code
The CNC Mill's in MARC can utilize G-Code Generated from Fusion or V-Carve Pro. This instruction set will not cover the configurations for G-Code generation.
Avid CNC Software
To manage the mill, use the Avid CNC Software from the desktop:
Home the system
- Regardless of where the machine is, click on Enable
- Select the Jogging Tab and then bring the CNC mill head up all the way using either the Z+or Page Up button on the keyboard.
- Click on Zero Z button
- Click on Home X Y Axes. This should move the machine to the back right and enable soft limits. IFF the machine is not in the back right corner, click the home button again.
- This completes the system homing process
