Printing - ETB/MARC: Difference between revisions

From SEPT Knowledge Base
VisualWikitext
m (VPN link updated)
mNo edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
# Download the '''Smart Start printer Driver''' for your system from: [https://www.support.xerox.com/en-us/product/altalink-c8000-series/downloads Xerox Smart Start - Driver Installer]
 
## For OSx use '''Mac OS Common Print Driver Installer'''
==== Download Drivers ====
# From the same link, also download the
# Download the '''Smart Start printer Driver''' for your system from either:  
# Accept the UAC if required<br/>[[File:Printing - ETB-MARC pic1.png]]
## Windows
# Agree to the Terms of Service<br/>[[File:Printing - ETB-MARC pic2.png]]
### [https://www.support.xerox.com/en-us/product/altalink-c8000-series/downloads Xerox Smart Start - Driver Installer]
# Select the correct printer from the discovered printers by clicking quick install:<br/>[[File:Printing - ETB-MARC pic3.png]]
### [https://www.microsoft.com/en-ca/p/xerox-print-and-scan-experience/9wzdncrfj1f8 Microsoft APP Store]
## If you don't see desired printer listed, you might need to connect to the [https://uts.mcmaster.ca/services/computers-printers-and-software/virtual-private-networking/ VPN] if you're on the WiFi  
## OSX
### [https://www.support.xerox.com/en-us/product/altalink-c8000-series/downloads Xerox Smart Start - Driver Installer]<br/>''NOTE'': use '''Mac OS Common Print Driver Installer'''
# Accept the UAC if required<br />[[File:Printing - ETB-MARC pic1.png]]
# Agree to the Terms of Service<br />[[File:Printing - ETB-MARC pic2.png]]
# Select the correct printer from the discovered printers by clicking quick install:<br />[[File:Printing - ETB-MARC pic3.png]]
## If you don't see desired printer listed, you might need to connect to the [https://uts.mcmaster.ca/services/computers-printers-and-software/virtual-private-networking/ VPN] if you're on the WiFi
## Select "Don't your printer?"
## Select "Don't your printer?"
## Enter the printer IP in the textbox as:
## Enter the printer IP in the textbox as:
Line 11: Line 16:
### '''130.113.102.11 - 2nd Floor'''
### '''130.113.102.11 - 2nd Floor'''
### '''130.113.129.94 - 5th Floor'''
### '''130.113.129.94 - 5th Floor'''
### '''130.113.158.49 - MARC 260'''
### '''130.113.158.49 - MARC 260'''<br/>[[File:Printing - ETB-MARC pic4.png]]
##<br/>[[File:Printing - ETB-MARC pic4.png]]
## click Continue
## click Continue  
## Click Quick Install
## Click Quick Install
# Click Done<br/>[[File:Printing - ETB-MARC pic5.png]]
# Click Done<br/>[[File:Printing - ETB-MARC pic5.png]]
# Download the Xerox Print and Scan Experience form the [https://www.microsoft.com/en-ca/p/xerox-print-and-scan-experience/9wzdncrfj1f8 Microsoft APP Store]
 
# Open the Print and Scan Experience App
==== Configure Authentication ====
# Select Print Queue Settings<br/>[[File:Printing - ETB-MARC pic6.png]]
 
# Click on Accounting<br/>[[File:Printing - ETB-MARC pic7.png]]
===== Windows 11 =====
# Please read carfully:
 
## For ETB 219 - Choose '''Network Accounting''' and enter your ''MacID'' as the ''UserID'' and ''Password'' under ''Account ID.''<br/>[[File:Printing - ETB-MARC pic8.png]]
# Open the run Dialog with '''⊞ Win + R'''
## For ETB 520 - choose '''Charge Me''' and enter your user code in under the Default ID.<br/>[[File:Printing - ETB-MARC pic9.png]]
# Type in '''control printers'''
# You should now be able to print
# Select Printers & Scanners<br/>[[File:Printers & Scanners.png|Printers & Scanners]]
# Select the printer that was just installed i.e. ETB 219 PS
# Click on '''More Devices and Printers settings'''. This will open up a new window
# Right Click on the printer that was just installed and select '''Xerox Printer Properties'''<br/>[[File:Xerox printer properties.png|Xerox printer properties]]
# In the accounting tab, under:
## ''Default User ID'' type in the authentication as required i.e. '''printer code or MacID'''
## ''Default Account ID'' type in the corresponding password i.e. '''printer code or MacID password'''
 
===== Windows 10 =====
 
# Open the run Dialog with '''⊞ Win + R'''
# Type in '''control printers'''
# Right Click on the printer that was just installed and select '''Xerox Printer Properties'''<br/>[[File:Xerox printer properties.png|Xerox printer properties]]
# In the accounting tab, under:
## ''Default User ID'' type in the authentication as required i.e. '''printer code or MacID'''
## ''Default Account ID'' type in the corresponding password i.e. '''printer code or MacID password'''

Latest revision as of 10:39, 9 September 2024

Download Drivers

  1. Download the Smart Start printer Driver for your system from either:
    1. Windows
      1. Xerox Smart Start - Driver Installer
      2. Microsoft APP Store
    2. OSX
      1. Xerox Smart Start - Driver Installer
        NOTE: use Mac OS Common Print Driver Installer
  2. Accept the UAC if required
  3. Agree to the Terms of Service
  4. Select the correct printer from the discovered printers by clicking quick install:
    1. If you don't see desired printer listed, you might need to connect to the VPN if you're on the WiFi
    2. Select "Don't your printer?"
    3. Enter the printer IP in the textbox as:
      1. 130.113.86.63 - 1st Floor
      2. 130.113.102.11 - 2nd Floor
      3. 130.113.129.94 - 5th Floor
      4. 130.113.158.49 - MARC 260
    4. click Continue
    5. Click Quick Install
  5. Click Done

Configure Authentication

Windows 11
  1. Open the run Dialog with ⊞ Win + R
  2. Type in control printers
  3. Select Printers & Scanners
    Printers & Scanners
  4. Select the printer that was just installed i.e. ETB 219 PS
  5. Click on More Devices and Printers settings. This will open up a new window
  6. Right Click on the printer that was just installed and select Xerox Printer Properties
    Xerox printer properties
  7. In the accounting tab, under:
    1. Default User ID type in the authentication as required i.e. printer code or MacID
    2. Default Account ID type in the corresponding password i.e. printer code or MacID password
Windows 10
  1. Open the run Dialog with ⊞ Win + R
  2. Type in control printers
  3. Right Click on the printer that was just installed and select Xerox Printer Properties
    Xerox printer properties
  4. In the accounting tab, under:
    1. Default User ID type in the authentication as required i.e. printer code or MacID
    2. Default Account ID type in the corresponding password i.e. printer code or MacID password
Retrieved from "http://kb.sept.mcmaster.ca/wiki/index.php?title=Printing_-_ETB/MARC&oldid=376"