AV Instructions: ETB 529
Overview
ETB-529 has 2 projectors and 2 screens. The instructor workstation is always connected to the system and an HDMI cable is available for projecting from a laptop. Additionally the room is outfitted with a camera that has 2 preset views: the instructor's desk and the projector screen behind the instructor's desk
The instructors desk is the first desk from the main entrance:
Just behind the instructors desk and to the left of the projector screen is the projector control panel:
Several of the buttons on the control panel have adjacent labels which indicate their function. This is shown below in the image, then each function described:
| Label | Description |
|---|---|
| Proj. 1 | The ON/OFF button for the projector on the left hand side of the room (the board behind instructors desk) |
| Proj.2 | The ON/OFF button for the projector on the right hand side of the room (the retractable projector screen closer to the windows) |
| Computer | Changes the input of both projectors to the instructor's workstation |
| Laptop | Changes the input of both projectors to the HMDI cable that can be found at the instructor's desk (for projecting from a laptop) |
| Camera | Changes the input of the right hand side projector to that of the room's camera |
| Cam. Preset | Toggles between the 2 camera view presets (instructors desk, and projector board) |
| Blank (LHS) | Toggles the projector on the left hand side of the room displaying content and going blank |
| Blank (RHS) | Toggles the projector on the right hand side of the room displaying content and going blank |
Projecting from the instructor's workstation
To project from the instructor's workstation
- Log into the workstation
- On the projector control panel, press the ON button for Proj.1 and Proj.2
- After the projector has turned on, press the left-hand side COMP button (has label "Computer")
See below for an image showing the buttons to press:
Projecting from your laptop
To project from a laptop, first locate the free HDMI cable on the instructor's desk (likely hanging of the back behind the monitor stand). The HDMI cable looks like this:
Plug the HDMI cable into the laptop. If the laptop does not have an HDMI port then an adapter from HDMI to the type of port the laptop has is required (not provided). Then go to the projector control panel and
- Press the ON button for Proj.1 and Proj.2
- After the projector has turned on, press the right-hand side COMP button (has label "Laptop")
See below for an image of the buttons to press:
Using the camera
TODO
