SEPT Knowledge Base - User contributions [en]

ETB 226 General Instructions

2024-03-12T17:38:37Z

Xu518: ...

===== This page is about a general Instructions of ETB 226 for the use of the TV. =====

=== '''Instructions on Starting the TV and Login to the Local User.''' ===
Here is the TV in room 226.

[[File:1.png]]

In order to start the TV, press the "ON" button (picture shows below) located in the cart underneath the TV.

[[File:2.png|463x463px]]

After pressing, the button should turn red, and the computer should be flashing lights.

[[File:3.re.png]]

Now press the '''PC''' button that is circled in Yellow to start the display. Wait for a few seconds.

[[File:4.png]]

This is the default login window, follow the instructions on the table to login with correct username and password.

If you want to connect the TV with your own machine, please follow the next section's instructions.

=== '''Teams Shortcut''' ===
After login to the local user, if you want to open Teams, there will be a shortcut from the desktop that leads you to the login page of teams. The shortcut app icon is the icon of Microsoft.

[[File:10.png|509x509px]]

=== '''Instructions on How to Connect Your Own Device to the TV.''' ===
--Your machine should have a HDMI port in order to connect.--

[[File:5.png]]

This is the HDMI cable (input 7). The other end is put on the table for connecting machines.

[[File:6.png]]

Plug this into your computer's HDMI's port.

[[File:7.png|522x522px]]

Press the INPUT button circled by yellow, and use the direction button circled by red to switch the input port.

[[File:8.png|606x606px]]

When you press the INPUT button, the TV should look like this.

Switch the INPUT to '''INPUT 7.'''

[[File:Input 8.png|514x514px]]

ETB 226 General Instructions

2024-03-12T17:38:09Z

Xu518: /* This page is about a general Instructions of ETB 226 for the use of the TV */

This page is about a general Instructions of ETB 226 for the use of the TV.

=== '''Instructions on Starting the TV and Login to the Local User.''' ===
Here is the TV in room 226.

[[File:1.png]]

In order to start the TV, press the "ON" button (picture shows below) located in the cart underneath the TV.

[[File:2.png|463x463px]]

After pressing, the button should turn red, and the computer should be flashing lights.

[[File:3.re.png]]

Now press the '''PC''' button that is circled in Yellow to start the display. Wait for a few seconds.

[[File:4.png]]

This is the default login window, follow the instructions on the table to login with correct username and password.

If you want to connect the TV with your own machine, please follow the next section's instructions.

=== '''Teams Shortcut''' ===
After login to the local user, if you want to open Teams, there will be a shortcut from the desktop that leads you to the login page of teams. The shortcut app icon is the icon of Microsoft.

[[File:10.png|509x509px]]

=== '''Instructions on How to Connect Your Own Device to the TV.''' ===
--Your machine should have a HDMI port in order to connect.--

[[File:5.png]]

This is the HDMI cable (input 7). The other end is put on the table for connecting machines.

[[File:6.png]]

Plug this into your computer's HDMI's port.

[[File:7.png|522x522px]]

Press the INPUT button circled by yellow, and use the direction button circled by red to switch the input port.

[[File:8.png|606x606px]]

When you press the INPUT button, the TV should look like this.

Switch the INPUT to '''INPUT 7.'''

[[File:Input 8.png|514x514px]]

ETB 226 General Instructions

2024-03-12T17:37:28Z

Xu518: ..

==== '''This page is about a general Instructions of ETB 226 for the use of the TV''' ====

=== '''Instructions on Starting the TV and Login to the Local User.''' ===
Here is the TV in room 226.

[[File:1.png]]

In order to start the TV, press the "ON" button (picture shows below) located in the cart underneath the TV.

[[File:2.png|463x463px]]

After pressing, the button should turn red, and the computer should be flashing lights.

[[File:3.re.png]]

Now press the '''PC''' button that is circled in Yellow to start the display. Wait for a few seconds.

[[File:4.png]]

This is the default login window, follow the instructions on the table to login with correct username and password.

If you want to connect the TV with your own machine, please follow the next section's instructions.

=== '''Teams Shortcut''' ===
After login to the local user, if you want to open Teams, there will be a shortcut from the desktop that leads you to the login page of teams. The shortcut app icon is the icon of Microsoft.

[[File:10.png|509x509px]]

=== '''Instructions on How to Connect Your Own Device to the TV.''' ===
--Your machine should have a HDMI port in order to connect.--

[[File:5.png]]

This is the HDMI cable (input 7). The other end is put on the table for connecting machines.

[[File:6.png]]

Plug this into your computer's HDMI's port.

[[File:7.png|522x522px]]

Press the INPUT button circled by yellow, and use the direction button circled by red to switch the input port.

[[File:8.png|606x606px]]

When you press the INPUT button, the TV should look like this.

Switch the INPUT to '''INPUT 7.'''

[[File:Input 8.png|514x514px]]

ETB 226 General Instructions

2024-03-12T17:36:47Z

Xu518: .

ETB 226 General Instructions

2024-03-12T17:36:19Z

Xu518: content list

This page is about a general Instructions of ETB 226 for the use of the TV.

==== '''Content List:''' ====

* '''Instructions on Starting the TV and Login to the Local User'''
* '''Teams Shortcut'''
* '''Instructions on How to Connect Your Own Device to the TV'''

=== '''Instructions on Starting the TV and Login to the Local User.''' ===
Here is the TV in room 226.

[[File:1.png]]

In order to start the TV, press the "ON" button (picture shows below) located in the cart underneath the TV.

[[File:2.png|463x463px]]

After pressing, the button should turn red, and the computer should be flashing lights.

[[File:3.re.png]]

Now press the '''PC''' button that is circled in Yellow to start the display. Wait for a few seconds.

[[File:4.png]]

This is the default login window, follow the instructions on the table to login with correct username and password.

If you want to connect the TV with your own machine, please follow the next section's instructions.

=== '''Teams Shortcut''' ===
After login to the local user, if you want to open Teams, there will be a shortcut from the desktop that leads you to the login page of teams. The shortcut app icon is the icon of Microsoft.

[[File:10.png|509x509px]]

=== '''Instructions on How to Connect Your Own Device to the TV.''' ===
--Your machine should have a HDMI port in order to connect.--

[[File:5.png]]

This is the HDMI cable (input 7). The other end is put on the table for connecting machines.

[[File:6.png]]

Plug this into your computer's HDMI's port.

[[File:7.png|522x522px]]

Press the INPUT button circled by yellow, and use the direction button circled by red to switch the input port.

[[File:8.png|606x606px]]

When you press the INPUT button, the TV should look like this.

Switch the INPUT to '''INPUT 7.'''

[[File:Input 8.png|514x514px]]

ETB 226 General Instructions

2024-03-12T17:34:33Z

Xu518: subheadings

ETB 226 General Instructions

2024-03-12T17:34:06Z

Xu518: bold headings

This page is about a general Instructions of ETB 226 for the use of the TV.

== '''Instructions on Starting the TV and Login to the Local User.''' ==
Here is the TV in room 226.

[[File:1.png]]

In order to start the TV, press the "ON" button (picture shows below) located in the cart underneath the TV.

[[File:2.png|463x463px]]

After pressing, the button should turn red, and the computer should be flashing lights.

[[File:3.re.png]]

Now press the '''PC''' button that is circled in Yellow to start the display. Wait for a few seconds.

[[File:4.png]]

This is the default login window, follow the instructions on the table to login with correct username and password.

If you want to connect the TV with your own machine, please follow the next section's instructions.

== '''Teams Shortcut''' ==
After login to the local user, if you want to open Teams, there will be a shortcut from the desktop that leads you to the login page of teams. The shortcut app icon is the icon of Microsoft.

[[File:10.png|509x509px]]

== '''Instructions on How to Connect Your Own Device to the TV.''' ==
--Your machine should have a HDMI port in order to connect.--

[[File:5.png]]

This is the HDMI cable (input 7). The other end is put on the table for connecting machines.

[[File:6.png]]

Plug this into your computer's HDMI's port.

[[File:7.png|522x522px]]

Press the INPUT button circled by yellow, and use the direction button circled by red to switch the input port.

[[File:8.png|606x606px]]

When you press the INPUT button, the TV should look like this.

Switch the INPUT to '''INPUT 7.'''

[[File:Input 8.png|514x514px]]

ETB 226 General Instructions

2024-03-12T17:32:35Z

Xu518: minor change

This page is about a general Instructions of ETB 226 for the use of the TV.

== Instructions on Starting the TV and Login to the Local User. ==
Here is the TV in room 226.

[[File:1.png]]

In order to start the TV, press the "ON" button (picture shows below) located in the cart underneath the TV.

[[File:2.png|463x463px]]

After pressing, the button should turn red, and the computer should be flashing lights.

[[File:3.re.png]]

Now press the '''PC''' button that is circled in Yellow to start the display. Wait for a few seconds.

[[File:4.png]]

This is the default login window, follow the instructions on the table to login with correct username and password.

If you want to connect the TV with your own machine, please follow the next section's instructions.

== Teams Shortcut ==
After login to the local user, if you want to open Teams, there will be a shortcut from the desktop that leads you to the login page of teams. The shortcut app icon is the icon of Microsoft.

[[File:10.png|509x509px]]

== Instructions on How to Connect Your Own Device to the TV. ==
--Your machine should have a HDMI port in order to connect.--

[[File:5.png]]

This is the HDMI cable (input 7). The other end is put on the table for connecting machines.

[[File:6.png]]

Plug this into your computer's HDMI's port.

[[File:7.png|522x522px]]

Press the INPUT button circled by yellow, and use the direction button circled by red to switch the input port.

[[File:8.png|606x606px]]

When you press the INPUT button, the TV should look like this.

Switch the INPUT to '''INPUT 7.'''

[[File:Input 8.png|514x514px]]

ETB 226 General Instructions

2024-03-12T17:31:05Z

Xu518: created page for ETB 226

=== Instructions on Starting the TV and Login to the Local User. ===
Here is the TV in room 226.

[[File:1.png]]

In order to start the TV, press the "ON" button (picture shows below) located in the cart underneath the TV.

[[File:2.png|463x463px]]

After pressing, the button should turn red, and the computer should be flashing lights.

[[File:3.re.png]]

Now press the '''PC''' button that is circled in Yellow to start the display. Wait for a few seconds.

[[File:4.png]]

This is the default login window, follow the instructions on the table to login with correct username and password.

If you want to connect the TV with your own machine, please follow the next section's instructions.

=== Teams Shortcut ===
After login to the local user, if you want to open Teams, there will be a shortcut from the desktop that leads you to the login page of teams. The shortcut app icon is the icon of Microsoft.

[[File:10.png|509x509px]]

=== Instructions on How to Connect Your Own Device to the TV. ===
--Your machine should have a HDMI port in order to connect.--

[[File:5.png]]

This is the HDMI cable (input 7). The other end is put on the table for connecting machines.

[[File:6.png]]

Plug this into your computer's HDMI's port.

[[File:7.png|522x522px]]

Press the INPUT button circled by yellow, and use the direction button circled by red to switch the input port.

[[File:8.png|606x606px]]

When you press the INPUT button, the TV should look like this.

Switch the INPUT to '''INPUT 7.'''

[[File:Input 8.png|514x514px]]

File:10.png

2024-03-12T17:30:01Z

Xu518:

shortcut app icon

File:Input 8.png

2024-03-12T17:22:51Z

Xu518:

input 2

File:8.png

2024-03-12T17:19:17Z

Xu518:

input

File:7.png

2024-03-12T17:17:47Z

Xu518:

tv remote

File:6.png

2024-03-12T17:14:50Z

Xu518:

cable end

File:5.png

2024-03-12T17:12:33Z

Xu518:

cable

File:4.png

2024-03-12T17:07:48Z

Xu518:

File:3.re.png

2024-03-12T17:06:03Z

Xu518:

PC button

File:3.png

2024-03-12T17:03:51Z

Xu518:

power button and pc starting

File:2.png

2024-03-12T17:01:03Z

Xu518:

Power on

File:1.png

2024-03-12T16:59:28Z

Xu518:

Itbookings Site Instruction

2024-03-06T20:33:42Z

Xu518: /* Here is a screenshot of the main page when entering the website. */ typo change

A [https://uts.mcmaster.ca/services/computers-printers-and-software/virtual-private-networking/ VPN] connection is require at all time when using [https://itbookings.sept.mcmaster.ca/ itbookings website].

In this instruction page, we will introduce how to create items in the itbookings site and how to do an audit.

=== '''Create an Item''' ===
Here is a screenshot of the main page when entering the website.

[[File:Main page of itbookings.png|890x890px]]

'''- If you are going to create an item without an existed assets model, please follow the instructions below;'''

'''- If you are going to add an item into an already existed assets model, please jump to the next section;'''

'''- If you are not sure if the model is already exist, please follow instructions below.'''

==== '''Create an Asset Model''' ====
On the left-sidebar menu, move your mouse to '''setting''' (circled by yellow), and go to '''Asset Models''' (circled by red).

[[File:Main page setting.png]]

Here is a screenshot of the Asset Models page:

[[File:Assets Model.png]]

If you are not sure if the asset model is available, search in the search bar on the right top. If it is available, jump to the next section.

Click '''Create New''' to create a new asset model.
[[File:Assets Model II.png|center|490x490px]]
In Create New, you can see the following page:

[[File:Assets Model III.png]]

After filling all the information, save the asset model.

Right now, go back to the main page and go the second option on the sidebar, choose '''List All'''. We are going to create the item.

==== '''Create the Asset''' ====

Go the second option on the sidebar, choose '''List All'''.

[[File:9.png]]

Click '''Create New'''.

The following is a screenshot after clicking. The '''Asset Tag''' is automatically generated, do not change. Select the '''Model''' you created previously or one already existed.

[[File:New assets.png]]

Fill all the information, and click '''Save'''.

Right now you created a new item.

=== '''Audit an Item''' ===

Here is an Asset, we are going to use it as an example.

On the right side, click '''Audit''' (circled by yellow).

[[File:Audit item 2.png]]

The following is the page after clicking Audit.

[[File:Audit item 3.png]]

Fill all the information in order to finish the Audit process.

Itbookings Site Instruction

2024-03-06T20:33:09Z

Xu518: /* Create Asset Models */ some typo changes

A [https://uts.mcmaster.ca/services/computers-printers-and-software/virtual-private-networking/ VPN] connection is require at all time when using [https://itbookings.sept.mcmaster.ca/ itbookings website].

In this instruction page, we will introduce how to create items in the itbookings site and how to do an audit.

=== '''Create an Item''' ===

====== Here is a screenshot of the main page when entering the website. ======
[[File:Main page of itbookings.png|890x890px]]

'''- If you are going to create an item without an existed assets model, please follow the instructions below;'''

'''- If you are going to add an item into an already existed assets model, please jump to the next section;'''

'''- If you are not sure if the model is already exist, please follow instructions below.'''

==== '''Create an Asset Model''' ====
On the left-sidebar menu, move your mouse to '''setting''' (circled by yellow), and go to '''Asset Models''' (circled by red).

[[File:Main page setting.png]]

Here is a screenshot of the Asset Models page:

[[File:Assets Model.png]]

If you are not sure if the asset model is available, search in the search bar on the right top. If it is available, jump to the next section.

Click '''Create New''' to create a new asset model.
[[File:Assets Model II.png|center|490x490px]]
In Create New, you can see the following page:

[[File:Assets Model III.png]]

After filling all the information, save the asset model.

Right now, go back to the main page and go the second option on the sidebar, choose '''List All'''. We are going to create the item.

==== '''Create the Asset''' ====

Go the second option on the sidebar, choose '''List All'''.

[[File:9.png]]

Click '''Create New'''.

The following is a screenshot after clicking. The '''Asset Tag''' is automatically generated, do not change. Select the '''Model''' you created previously or one already existed.

[[File:New assets.png]]

Fill all the information, and click '''Save'''.

Right now you created a new item.

=== '''Audit an Item''' ===

Here is an Asset, we are going to use it as an example.

On the right side, click '''Audit''' (circled by yellow).

[[File:Audit item 2.png]]

The following is the page after clicking Audit.

[[File:Audit item 3.png]]

Fill all the information in order to finish the Audit process.

Itbookings Site Instruction

2024-03-06T20:31:07Z

Xu518: Create page on itbookigns site

A [https://uts.mcmaster.ca/services/computers-printers-and-software/virtual-private-networking/ VPN] connection is require at all time when using [https://itbookings.sept.mcmaster.ca/ itbookings website].

In this instruction page, we will introduce how to create items in the itbookings site and how to do an audit.

=== '''Create Asset Models''' ===

====== Here is a screenshot of the main page when entering the website. ======
[[File:Main page of itbookings.png|890x890px]]

====== '''- If you are going to create an item without an existed assets model, please follow the instructions below;''' ======

====== '''- If you are going to add an item into an already existed assets model, please jump to the next section;''' ======

====== '''- If you are not sure if the model is already exist, please follow instructions below.''' ======

==== '''Create an Asset Model''' ====
On the left-sidebar menu, move your mouse to '''setting''' (circled by yellow), and go to '''Asset Models''' (circled by red).

[[File:Main page setting.png]]

Here is a screenshot of the Asset Models page:

[[File:Assets Model.png]]

If you are not sure if the asset model is available, search in the search bar on the right top. If it is available, jump to the next section.

Click '''Create New''' to create a new asset model.
[[File:Assets Model II.png|center|490x490px]]
In Create New, you can see the following page:

[[File:Assets Model III.png]]

After filling all the information, save the asset model.

Right now, go back to the main page and go the second option on the sidebar, choose '''List All'''. We are going to create the item.

=== '''Create the Asset''' ===

Go the second option on the sidebar, choose '''List All'''.

[[File:9.png]]

Click '''Create New'''.

The following is a screenshot after clicking. The '''Asset Tag''' is automatically generated, do not change. Select the '''Model''' you created previously or one already existed.

[[File:New assets.png]]

Fill all the information, and click '''Save'''.

Right now you created a new item.

=== '''Audit an Item''' ===

Here is an Asset, we are going to use it as an example.

On the right side, click '''Audit''' (circled by yellow).

[[File:Audit item 2.png]]

The following is the page after clicking Audit.

[[File:Audit item 3.png]]

Fill all the information in order to finish the Audit process.

File:Audit item 3.png

2024-03-06T20:29:18Z

Xu518:

File:Audit item 2.png

2024-03-06T20:28:19Z

Xu518:

File:Audit item 1.png

2024-03-06T20:25:46Z

Xu518:

File:9.png

2024-03-06T20:20:29Z

Xu518:

asset new

File:New assets.png

2024-03-06T20:16:22Z

Xu518:

8.new assets

File:Main page assets..png

2024-03-06T20:14:45Z

Xu518:

7. main page assets

File:Main page assets.png

2024-03-06T20:10:52Z

Xu518:

6.main page assets

File:Assets Model III.png

2024-03-06T20:07:42Z

Xu518:

5. Assets Model

File:Assets Model II.png

2024-03-06T20:05:29Z

Xu518:

4. Assets Model

File:Assets Model.png

2024-03-06T20:03:15Z

Xu518:

3. Assets Model

File:Main page setting.png

2024-03-06T19:58:55Z

Xu518:

2. main page setting

File:Main page of itbookings.png

2024-03-06T19:49:08Z

Xu518:

1. main page of itbookings

EXXACT server usage (Neural Networks)

2024-03-06T19:21:00Z

Xu518: VPN link updated

<blockquote>''In all instances, please note that docker will be used for training''

''A [https://uts.mcmaster.ca/services/computers-printers-and-software/virtual-private-networking/ VPN] connection is required to access this machine.''

''Booking of this resource for extended periods is required at: [https://outlook.office365.com/owa/calendar/SEPTNNTrainingEXXactServer@mcmaster.ca/bookings/ SEPT NN Training (EXXact)]''</blockquote>

=== Code Editors ===
It is highly suggested that a code editor that integrates into remote systems is used for development alongside git.

Common IDE with remote SSH suggestions would include:

* [https://code.visualstudio.com/docs/remote/ssh Visual Studio Code (VS Code)]
* [https://docs.microsoft.com/en-us/cpp/linux/connect-to-your-remote-linux-computer?view=msvc-160 Visual Studio Community]
* [https://www.jetbrains.com/help/pycharm/configuring-remote-interpreters-via-ssh.html#ssh Jetbrains PyCharm]

Common git hosts would include:

* [https://education.github.com/ GitHub]
* [https://gitlab.com/users/sign_in GitLab]
* [https://datadev.sept.mcmaster.ca/users/sign_in SEPT Local GitLab integration]

=== Creating and running a container for your code ===

# Log into Exxact server as '''nnuser''' using a ssh client, i.e. [https://www.putty.org/ Putty], [https://github.com/PowerShell/PowerShell#get-powershell Powershell], etc. with ''nnuser@130.113.129.242'' and password ''Exxact1.''
# Create a folder with YOUR MacID using the command mkdir [MacID]
# Change directory into your directory using cd ./[MacID]. Do not use or override another users directory.
# Copy your data and python script and data into your directory using an SFTP client, i.e. FileZilla, WinSCP etc.
# Choose the trainer of choice
## Custom – A docker image you created yourself
## Tensorflow (https://hub.docker.com/r/tensorflow/tensorflow)
## PyTorch (https://hub.docker.com/r/pytorch/pytorch)
# For TensorFlow: Create a docker image with the following command and let it run: <syntaxhighlight line="1" start="1">
$ docker run -d --rm --name [MacID] --gpus all -u $(id -u):$(id -g) -v /data/nnuser/[MacID]/:/data tensorflow/tensorflow:latest-gpu python /data/main.py

</syntaxhighlight>This will:
## Create an image with your MacID as the name (--name [MacID])
## Remove the image once its done (--rm should be removed while testing and getting your files setup)
## Allow you access to the files that you saved (--user $UID)
## Run your script with your custom code until it exits (python 3 /data/main.py) *''Note: You should replace main.py with your main executable function if it was '''not''' named main.py''
## Use GPU acceleration and the latest TensorFlow version
# For PyTorch: Create a docker image with the following command and let it run: <syntaxhighlight line="1" start="1">
$ docker run -d --rm --name [MacID] --gpus all -u $(id -u):$(id -g) -v /data/nnuser/[MacID]/:/data pytorch/pytorch:latest python /data/main.py
</syntaxhighlight>This will:
## Create an image with your MacID as the name (--name [MacID])
## Remove the image once its done (--rm should be removed while testing and getting your files setup)
## Allow you access to the files that you saved (--user $UID)
## Run your script with your custom code until it exits (python 3 /data/main.py) *''Note: You should replace main.py with your main executable function if it was '''not''' named main.py''
## Use GPU acceleration and the latest PyTorch version

'''NOTE''''': It is highly recommended that you write your python code output to console as this will get both logged and allow you to see what your script is doing while running during training.''

=== Managing your container ===

==== When running: ====

# View your container at 130.113.129.242:9000 with username ''nnuser'' and password ''Exxact1''
# Click Containers: [[File:EXXACT pic1.png]]
# Find your container: [[File:EXXACT pic2.png]]
# Attach to see output: [[File:EXXACT pic3.png]]
# View Output [[File:EXXACT pic4.png]]

==== When testing (container does not include --rm statement): ====

# View your container at <nowiki>https://130.113.129.242:9443</nowiki> with username ''nnuser'' and password ''Exxact1''
# Click Containers: [[File:EXXACT pic1.png]]
# Find your container: [[File:EXXACT pic2.png]]
# Logs to see output: [[File:EXXACT pic7.png]]
# View Output: This will show errors etc. [[File:EXXACT pic8.png]]

=== IMPORTANT NOTES ===

# Save your OUTPUT of your model to your '''/data''' NOTHING will get saved that is placed ANYWHERE else
# Remove your files once done. There is limited space on the server.
# Respect other users training. This is a shared resource. Do not stop or remove their containers without permission

=== Scripts for Import - Custom requirements ===
If your script requires any imports that is non-standard to a package, you will need to adjust your execution string accordingly. <blockquote>'''NOTE''': This script requires that you finish with your training to get access to any produced files.</blockquote>You will need to create the following:

* a requirements.txt file within your python environment
** <syntaxhighlight line="1">
#Google Colab
!pip freeze > requirements.txt
</syntaxhighlight><syntaxhighlight>
#Local Python env.
pip freeze > requirements.txt
</syntaxhighlight>
* a shell script that installs the imports and runs the script. This can be copied.
** <syntaxhighlight line="1" start="1">
#entrypoint.sh (Python 3)

#!/bin/bash
python3 -m pip install requests
python3 -m pip install PIL
pip install --upgrade pip
pip install /data/requirements.txt
python3 /data/main.py
chown $USERID:$USERID -R /data
</syntaxhighlight><syntaxhighlight>
#entrypoint.sh (Python 2)

#!/bin/bash
python -m pip install requests
python -m pip install PIL
pip install --upgrade pip
pip install /data/requirements.txt
python /data/main.py
chown $USERID:$USERID -R /data
</syntaxhighlight>

When the shell script is used, adjust your string as follows:<syntaxhighlight>
#Docker Tensorflow
$ docker run -d --rm --name [MacID] -u $(id -u):$(id -g) --gpus all -e USERID:$UID -v /data/nnuser/[MacID]/:/data tensorflow/tensorflow:latest-gpu /bin/bash /data/entrypoint.sh
</syntaxhighlight><syntaxhighlight>
#Docker Pytorch
$ docker run -d --rm --name [MacID] -u $(id -u):$(id -g) --gpus all -e USERID:$UID -v /data/nnuser/[MacID]/:/data pytorch/pytorch:latest /bin/bash /data/entrypoint.sh

</syntaxhighlight>

Printing - ETB/MARC

2024-03-06T19:20:33Z

Xu518: VPN link updated

# Download the '''Smart Start printer Driver''' for your system from: [https://www.support.xerox.com/en-us/product/altalink-c8000-series/downloads Xerox Smart Start - Driver Installer]
## For OSx use '''Mac OS Common Print Driver Installer'''
# From the same link, also download the
# Accept the UAC if required [[File:Printing - ETB-MARC pic1.png]]
# Agree to the Terms of Service [[File:Printing - ETB-MARC pic2.png]]
# Select the correct printer from the discovered printers by clicking quick install: [[File:Printing - ETB-MARC pic3.png]]
## If you don't see desired printer listed, you might need to connect to the [https://uts.mcmaster.ca/services/computers-printers-and-software/virtual-private-networking/ VPN] if you're on the WiFi
## Select "Don't your printer?"
## Enter the printer IP in the textbox as:
### '''130.113.86.63 - 1st Floor'''
### '''130.113.102.11 - 2nd Floor'''
### '''130.113.129.94 - 5th Floor'''
### '''130.113.158.49 - MARC 260'''
## [[File:Printing - ETB-MARC pic4.png]]
## click Continue
## Click Quick Install
# Click Done [[File:Printing - ETB-MARC pic5.png]]
# Download the Xerox Print and Scan Experience form the [https://www.microsoft.com/en-ca/p/xerox-print-and-scan-experience/9wzdncrfj1f8 Microsoft APP Store]
# Open the Print and Scan Experience App
# Select Print Queue Settings [[File:Printing - ETB-MARC pic6.png]]
# Click on Accounting [[File:Printing - ETB-MARC pic7.png]]
# Please read carfully:
## For ETB 219 - Choose '''Network Accounting''' and enter your ''MacID'' as the ''UserID'' and ''Password'' under ''Account ID.'' [[File:Printing - ETB-MARC pic8.png]]
## For ETB 520 - choose '''Charge Me''' and enter your user code in under the Default ID. [[File:Printing - ETB-MARC pic9.png]]
# You should now be able to print

Connecting to VMware Horizon for SEPT Labs/Software

2024-03-06T19:19:17Z

Xu518: VPN link updated

<blockquote>'''Note''' that this setup requires your machine to be restarted. Please '''SAVE and CLOSE''' all programs before starting the setup. To connect to these servers, a '''[https://uts.mcmaster.ca/services/computers-printers-and-software/virtual-private-networking/ VPN]''' connection is required at all times.</blockquote>

=== Download and setup VMware ===

# Download the VMWare Horizon Client (At least V8 2309, suggested V8): [https://customerconnect.vmware.com/en/downloads/details?downloadGroup=CART24FQ3_WIN_2309&productId=1027&rPId=71992 Windows Horizon Client] [https://customerconnect.vmware.com/en/downloads/details?downloadGroup=CART24FQ3_MAC_2309&productId=1027&rPId=71993 OSx Horizon Client] [https://customerconnect.vmware.com/en/downloads/info/slug/desktop_end_user_computing/vmware_horizon_clients/horizon_8 Other Devices]
# Install the VMWare Horizon Client from your downloads [[File:VMWare Horizon Client.png]]
# Accept Windows UAC by clicking on “Yes” [[File:VMWare Horizon Client pic2.png]]
# Accept licence terms and install the client by clicking on “Agree & Install” [[File:VMWare Horizon Client pic3.png]]
# Click on “Finish” once the application is done installing [[File:VMWare Horizon Client pic4.png]]
# Restart Machine by clicking on “Restart Now” [[File:VMWare Horizon Client pic5.png]]
# Open VMware Horizon Client and click on either “New Server” or “Add Server” [[File:VMWare Horizon Client6.png]]
# Enter the address of the building you wish to connect to
## If your lab is in ETB, enter “[http://etblabs.sept.mcmaster.ca/ etblabs.sept.mcmaster.ca]” and click “Connect” [[File:VMWare Horizon Client pic7.png]]
## If your lab is in MARC, enter “[http://marclabs.sept.mcmaster.ca/ marclabs.sept.mcmaster.ca]” and click “Connect” [[File:VMWare Horizon Client pic8.png]]
## If your lab is the GRAD open labs, enter "vdi.sept.mcmaster.ca" and click "Connect" [[File:VMWare Horizon Client pic9.png]]
# Enter your MacID and password [[File:VMWare Horizon Client pic10.png]]
# Select the appropriate LAB or desktop application [[File:VMWare Horizon Client pic11.png]]
# Wait for the connection to load [[File:VMWare Horizon Client pic12.png]]
# Connect required USB devices for Lab Experiments [[File:VMWare Horizon Client pic13.png]]

=== Accessing Remote Applications: ===
In some cases, it is better to access individual applications remotely instead of the entire computer. To obtain direct access to these applications they must be assigned to you before accessing them. Upon login, to the respective server (ETB or MARC) you will see any available applications on the dashboard. [[File:VMWare Horizon Client pic14.png]]

Launching any of these applications on the right will open as if it is installed on your location machine. If you are frequently accessing an application, you can create a desktop shortcut by right-clicking on the application and selecting “Create Shortcut to Desktop”. This will place the application on your desktop for easy access. [[File:VMWare Horizon Client pic15.png]]

=== Session Collaboration Setup for Host Machine: ===
Note that to collaborate on the same machine as another user, the VMware Blast option must be selected. To select this option, right-click on the lab you wish to connect to and select “VMware Blast” if it is not already selected. [[File:VMWare Horizon Client pic16.png]]
# Once you have connected to your remote machine and are on the desktop, click the arrow in the bottom right corner of the screen to open the system tray [[File:VMWare Horizon Client pic17.png]]
# Once the system tray is open, click the icon highlighted below to open the session collaboration tool [[File:VMWare Horizon Client pic18.png]]
# Enter the McMaster email address of the person that you want to connect to your session [[File:VMWare Horizon Client pic19.png]]
# Click on the user's name to add them as a session collaborator and when prompted click “Copy Link” [[File:VMWare Horizon Client pic20.png]]
# A session collaboration icon will now appear on your desktop. Double click on this icon to bring up the session control panel. From here you can see who has been invited to your session, provide users with control of the screen, add more people, and end the collaboration session. [[File:VMWare Horizon Client pic21.png]]

=== Joining a VDI Collaboration Session: ===

# To join a user's VDI session, open the VMware Horizon Client and login to the appropriate building where the host has started a session (ETB or MARC). If you have not yet added the server, see [https://servicedesk.sept.mcmaster.ca/kb/pages/viewpage.action?pageId=1572887#ConnectingtoVMwareHorizonforSEPTLabs/Software-SetupServerAddress Setup Server Address]. [[File:VMWare Horizon Client pic22.png]]
# Once you are logged in to the building, any sessions you have been invited to should appear in the list of available labs. Double click on the collaboration session to join. [[File:VMWare Horizon Client pic23.png]]

=== Common Issues: ===

===== Server unavailable - Failed to respond =====
[[File:VMWare Horizon Client pic24.png]] Check that you are connected to the VPN when you add or try and connect to the server. ([https://uts.mcmaster.ca/services/computers-printers-and-software/virtual-private-networking-students/ McMaster Student VPN])

===== When the VMware Horizon Client is first installed, it will default to selecting all “All Monitors” =====
When connecting to a VDI session you only have 1 monitor. This will cause the client to take over all monitors you have available in full screen. To use the Horizon Client on only a single monitor, right-click on the lab you wish to join and under “Display” select either “Fullscreen” or “Window – Large” [[File:VMWare Horizon Client pic25.png]]

===== The Connection Server Authentication Failed due to a certificate error =====
[[File:VMware Certificate Issue.jpg]]

See: [[VMWare Horizon Certificate error]]

AV Instructions: ETB B104

2024-01-24T19:18:24Z

Xu518: update on the backup projector

Updated instructions on the backup old projector:

-Manually turned on and off at the projector is needed as there is no remote. Please see the diagram below that illustrates the buttons on the projector.

[[File:Diagram of the projector.png]]

You will not need to turn on the main ceiling projector. Instead you can manually bring down the screen using the manual controls on the wall. The backup projector is connected to the instructor monitors DVI video feed and will not be affected by the main projector being off. Please see the diagram and instruction below for details.

[[File:B104.2.png]]

General guidelines:

1. Please return the provided adapters to the shelf underneath the instructor computer after use

[[File:Adapters to the shelf.png]]

2. Please bring your own adapter if your device does not have any of the following output ports: VGA, HDMI, DVI-D single link, DP, mini HDMI

[[File:Adapters2.png]]

3. If your device's output ports are not on its right side (i.e. are on its front, left, or back) then you may need to bring your own extension cable

4. Left-click and right-click refer to the default right-handed mouse configuration - reverse them if applicable

5. This room is able to simultaneously play audio from the provided computer as well as a your own device

6. This room has an ethernet cable for your device

[[File:Ethernet cable.png]]

7. The desk-embedded touchscreen is not very sensitive, so you may need to firmly and/or repeatedly press for the desired outcome

[[File:Desk-embedded touchscreen .png]]

8. The Symposium option copies the second monitor from the left of the instructor desk

[[File:The second monitor.png]]

<nowiki>===</nowiki>

Using provided computer, if you do not see any image on the screen:

1. Ensure the projector is on

a. Use the touchscreen to turn on the projector

[[File:Touchscreen6.png]]

2. Ensure the projector is selecting the computer as the input

a. Use the touchscreen to change the input that the projector is copying to Symposium

[[File:Touchscreen7.png]]

<nowiki>===</nowiki>

Using the provided computer, if you do not hear any sound:

3. Ensure the computer's sound is on and turned up, and selected properly

a. Left-click the speaker icon in your taskbar, press/hold the right-arrow key on the keyboard until loud enough

b. If there is no sound and/or a red circle with an X, right-click the speaker icon, left-click Sounds, left click Playback, right click right click an option on the list, and left-click Enable; repeat this + 3a if necessary

c. On the same menu as 3b, left-click Set as Default Device, test by repeating 3a, and repeat this if necessary

4. Ensure the projector’s sound is on and turned up

a. Use the touchscreen to increase the volume for Symposium (up arrows)

[[File:Touchscreen8.png]]

b. Repeat 3a, 3b, and 3c as necessary

<nowiki>===</nowiki>

Using your own device, if you do not see any image on the screen:

5. Ensure the proper cable and/or adapter is properly plugged in

a. Unplug and replug the cable and/or adapter

b. Tighten the retention screws if available

6. Ensure the projector is selecting the correct input

a. Use the touchscreen to change the input that the projector is copying to the one applicable (HDMI Laptop, DVI Laptop, or VGA Laptop)

[[File:Touchscreen9.png]]

<nowiki>===</nowiki>

Using your own device, if you do not hear any sound:

7. Ensure the audio cable is plugged in properly

a. Refer to 5a

8. Ensure your computer's sound is on and turned up

a. Refer to 3a, 3b, and 3c

9. Ensure the projector’s sound is on and turned up

a. Use the touchscreen to increase the volume for Laptop (up arrows)

[[File:Touchscreen10.png]]

10. Bring your own speakers, and ensure they are working properly

a. Ensure your speakers are properly powered and connected to your computer (this varies according to your speakers)

b. Repeat 3a, 3b, and 3c as necessary

File:B104.2.png

2024-01-24T19:14:17Z

Xu518:

diagram illustrating the screen wall control

File:Diagram of the projector.png

2024-01-24T19:09:59Z

Xu518:

B104.1

AV Instructions: ETB 536

2023-11-02T15:35:01Z

Xu518: Created page with "General guidelines: 1. Please do NOT turn off the power bar; it should have a red light File:ETB 536 pic1.png 2. Please do NOT unplug the speakers from the provided computer 3. Please do not unplug any HDMI cable shown in the picture below. There are two extra ports for HDMI connection on the top-left if necessary. File:ETB 536 pic2.png 4. Please return the provided HDMI cable neatly on top of the computer and video centre 5. Please bring your own adapte..."

General guidelines:

1. Please do NOT turn off the power bar; it should have a red light

[[File:ETB 536 pic1.png]]

2. Please do NOT unplug the speakers from the provided computer

3. Please do not unplug any HDMI cable shown in the picture below. There are two extra ports for HDMI connection on the top-left if necessary.

[[File:ETB 536 pic2.png]]

4. Please return the provided HDMI cable neatly on top of the computer and video centre

5. Please bring your own adapter if your device does not have an HDMI output port

6. Left-click and right-click refer to the default right-handed mouse configuration - reverse them

if applicable

====== =============================================================================== ======
Using the provided computer, if you do not hear any sound:

1. Ensure your computer's sound is on and turned up, and selected properly

a. Left-click the speaker icon in your taskbar, press/hold the right-arrow key on the keyboard

until loud enough

b. If there is a red circle with an X, right-click the speaker icon, left-click Sounds, left click

Playback, right click an option on the list, and left-click Enable; repeat this + 3a if necessary

c. On the same menu as 3b, left-click Set as Default Device, test by repeating 3a , and repeat

this if necessary

2. Ensure the speakers are powered, on, and sound turned up

a. The power bar should have a red light, and the speakers should have a blue light (both on the

computer); plug in the speakers, and press the Power button if necessary

There is a Button Panel Crib Sheet in the drawer of the Computer and video centre, follow the instructions on the crib sheet if necessary.

[[File:ETB 536 pic4.png]]

[[File:ETB 536 pic3.png]]

====== =============================================================================== ======
Using your own computer, if you do not hear any sound:

3. Ensure your computer's sound is on and turned up

a. Refer to 3a, 3b, and 3c

4. Bring your own speakers, and ensure they are selected properly

a. Ensure your speakers are properly powered and connected to your computer (this varies

according to your speakers)

b. Repeat 3a, 3b, and 3c as necessary

File:ETB 536 pic4.png

2023-11-02T15:31:41Z

Xu518:

Computer audio and video centre instructions

File:ETB 536 pic3.png

2023-11-02T15:30:35Z

Xu518:

Computer and video centre

File:ETB 536 pic2.png

2023-11-02T15:23:02Z

Xu518:

HDMI cables

File:ETB 536 pic1.png

2023-11-02T15:20:20Z

Xu518:

power buttons

Printing - ETB/MARC

2023-10-04T21:30:25Z

Xu518: Created page with "# Download the '''Smart Start printer Driver''' for your system from: [https://www.support.xerox.com/en-us/product/altalink-c8000-series/downloads Xerox Smart Start - Driver Installer] ## For OSx use '''Mac OS Common Print Driver Installer''' # From the same link, also download the # Accept the UAC if required File:Printing - ETB-MARC pic1.png # Agree to the Terms of Service File:Printing - ETB-MARC pic2.png # Select the correct printer from the discovered print..."

# Download the '''Smart Start printer Driver''' for your system from: [https://www.support.xerox.com/en-us/product/altalink-c8000-series/downloads Xerox Smart Start - Driver Installer]
## For OSx use '''Mac OS Common Print Driver Installer'''
# From the same link, also download the
# Accept the UAC if required [[File:Printing - ETB-MARC pic1.png]]
# Agree to the Terms of Service [[File:Printing - ETB-MARC pic2.png]]
# Select the correct printer from the discovered printers by clicking quick install: [[File:Printing - ETB-MARC pic3.png]]
## If you don't see desired printer listed, you might need to connect to the [https://uts.mcmaster.ca/services/computers-printers-and-software/virtual-private-networks-vpn/ VPN] if you're on the WiFi
## Select "Don't your printer?"
## Enter the printer IP in the textbox as:
### '''130.113.86.63 - 1st Floor'''
### '''130.113.102.11 - 2nd Floor'''
### '''130.113.129.94 - 5th Floor'''
### '''130.113.158.49 - MARC 260'''
## [[File:Printing - ETB-MARC pic4.png]]
## click Continue
## Click Quick Install
# Click Done [[File:Printing - ETB-MARC pic5.png]]
# Download the Xerox Print and Scan Experience form the [https://www.microsoft.com/en-ca/p/xerox-print-and-scan-experience/9wzdncrfj1f8 Microsoft APP Store]
# Open the Print and Scan Experience App
# Select Print Queue Settings [[File:Printing - ETB-MARC pic6.png]]
# Click on Accounting [[File:Printing - ETB-MARC pic7.png]]
# Please read carfully:
## For ETB 219 - Choose '''Network Accounting''' and enter your ''MacID'' as the ''UserID'' and ''Password'' under ''Account ID.'' [[File:Printing - ETB-MARC pic8.png]]
## For ETB 520 - choose '''Charge Me''' and enter your user code in under the Default ID. [[File:Printing - ETB-MARC pic9.png]]
# You should now be able to print

File:Printing - ETB-MARC pic9.png

2023-10-04T21:30:01Z

Xu518:

choose Charge Me and enter your user code in under the Default ID.

File:Printing - ETB-MARC pic8.png

2023-10-04T21:29:28Z

Xu518:

Choose Network Accounting

File:Printing - ETB-MARC pic7.png

2023-10-04T21:28:33Z

Xu518:

Click on Accounting