Doc-cam

From SEPT Knowledge Base
Revision as of 11:07, 20 November 2023 by Singj36 (talk | contribs) (Created page with " == ELMO P10 Document Camera == === Setup === '''1. Classroom setup; with a monitor/projector output:''' * Connect the power cable to the DC IN slot * Choose your output type: DVI/VGI ** 500 px * Use the desired media cable and connect one end to the doc cam and other end to a monitor/projector. * Turn power on from the doc cam * Set the output mode to Camera from the dial on the front ** 500 px * You will see outpu...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

ELMO P10 Document Camera

Setup

1. Classroom setup; with a monitor/projector output:

  • Connect the power cable to the DC IN slot
  • Choose your output type: DVI/VGI
  • Use the desired media cable and connect one end to the doc cam and other end to a monitor/projector.
  • Turn power on from the doc cam
  • Set the output mode to Camera from the dial on the front
  • You will see output on the monitor/projector


2. Online setup; digitally use/share output:

  • Connect the power cable to the DC IN slot
  • Choose your output type: DVI/VGI
  • Get a printer cable
  • Connect one end to the doc cam (on the right side) & connect the USB to your PC/Laptop
  • Download the legacy Image Mate 3 software for ELMO P10 Doc Cam here
  • Set the doc camera output to the Laptop Icon through the front dial
  • Open the Image Mate 3 app, and you will now see your Document Camera stream on the software window
  • You can now share this stream through any app of choice (Teams, Zoom etc) by sharing your screen or Image Mate 3 window.
Retrieved from "http://kb.sept.mcmaster.ca/wiki/index.php?title=Doc-cam&oldid=283"