OPC UA Configuration: Difference between revisions
From SEPT Knowledge Base
(Created page with "=== OPC Configuration - UA Config Tool === # Search for OPC UA Configuration and run as Administrator File:OPC UA Config Windows Search.png # Accept the UAC if required or enter an administrator username and password # For each of the endpoints click on the endpoint and select ''Edit'' File:OPC Endpoint Configuration.png # Select ''None (Insecure)'' as an allowed endpoint File:OPC Endpoint Security Policy.png # Add new endpoints as required IFF not connectin...") |
(No difference)
|
Revision as of 15:38, 6 November 2024
OPC Configuration - UA Config Tool
- Search for OPC UA Configuration and run as Administrator
- Accept the UAC if required or enter an administrator username and password
- For each of the endpoints click on the endpoint and select Edit
- Select None (Insecure) as an allowed endpoint
- Add new endpoints as required IFF not connecting from the local host
- Select Instance Certificates
- Check that the Certificates has been generated within the last 12 months. If not, click on Reissue Certificate for all certificates older than 12 months.
- Click on Close
OPC Integration - KepServerEX
- Ensure that all running systems that are connected to the KepServerEx instance is in a standby state.
- Launch the KepServerEX Configuration Tool
- Under the Project right click and select Properties
- Select OPC UA from the Property Groups
- Enable the Server Interface
- Allow Anonymous Login
- Click on Apply and OK
- Open the KepServerEX Config menu from the Task Tray
- Click on Reinitialize. This will take a minute to reset the KepServer instance and ALL connections will be lost.
