MARC 155B CNC Instructions: Difference between revisions
From SEPT Knowledge Base
(Created page with "=== G-Code === The CNC Mill's in MARC can utilize G-Code Generated from Fusion or V-Carve Pro. This instruction set will not cover the configurations for G-Code generation. === Avid CNC Software === To manage the mill, use the Avid CNC Software from the desktop: File:Avid CNC Software Launcher.png ==== Home the system ==== # Regardless of where the machine is, click on Enable File:Avid CNC Enable Button.png # Select the Jogging Tab and then bring the CNC mil...") |
(No difference)
|
Revision as of 11:54, 6 November 2024
G-Code
The CNC Mill's in MARC can utilize G-Code Generated from Fusion or V-Carve Pro. This instruction set will not cover the configurations for G-Code generation.
Avid CNC Software
To manage the mill, use the Avid CNC Software from the desktop:
Home the system
- Regardless of where the machine is, click on Enable
- Select the Jogging Tab and then bring the CNC mill head up all the way using either the Z+or Page Up button on the keyboard.
- Click on Zero Z button
- Click on Home X Y Axes. This should move the machine to the back right and enable soft limits. IFF the machine is not in the back right corner, click the home button again.
- This completes the system homing process
