Doc-cam: Difference between revisions
From SEPT Knowledge Base
(Created page with " == ELMO P10 Document Camera == === Setup === '''1. Classroom setup; with a monitor/projector output:''' * Connect the power cable to the DC IN slot * Choose your output type: DVI/VGI ** 500 px * Use the desired media cable and connect one end to the doc cam and other end to a monitor/projector. * Turn power on from the doc cam * Set the output mode to Camera from the dial on the front ** 500 px * You will see outpu...") |
(No difference)
|
Latest revision as of 12:07, 20 November 2023
ELMO P10 Document Camera
Setup
1. Classroom setup; with a monitor/projector output:
- Connect the power cable to the DC IN slot
- Choose your output type: DVI/VGI
- Use the desired media cable and connect one end to the doc cam and other end to a monitor/projector.
- Turn power on from the doc cam
- Set the output mode to Camera from the dial on the front
- You will see output on the monitor/projector
2. Online setup; digitally use/share output:
- Connect the power cable to the DC IN slot
- Choose your output type: DVI/VGI
- Get a printer cable
- Connect one end to the doc cam (on the right side) & connect the USB to your PC/Laptop
- Download the legacy Image Mate 3 software for ELMO P10 Doc Cam here
- Set the doc camera output to the Laptop Icon through the front dial
- Open the Image Mate 3 app, and you will now see your Document Camera stream on the software window
- You can now share this stream through any app of choice (Teams, Zoom etc) by sharing your screen or Image Mate 3 window.
